Kenwood Smart Memory KSM by pp1etl KSM Kenwood Smart Memory is a program to read and update the memory channels of a Kenwood amateur radio.It can program many popular radios and exchange data between them includin Icom Kenwood Yaesu Alinco Wouxun Puxing Baofeng It works on Windows and Linux and MacOSX. CHIRP CHIRP is a cross-platform, cross-radio programming tool.RadioComm RadioComm can be used to program your Icom radio’s memory, or to create nice radio-frequency spectra (see above) or to interface your radio to a huge database of frequencies.Note that each USB port on your PC typically will be assigned a different COM port by the Prolific driver, so if you unplug the USB-1 cable then plug it into a different port, you'll need to update the software's setting in order to reestablish a connectiion to the scanner. To connect to the scanner, you should set the software you are using to the same COM port as assigned to the USB-1 cable. After you install the drivers, when you plug in the USB-1 cable, it should appear as a COM port. Follow any instructions provided by Prolific for installing the drivers. Uniden cannot support 3rd-party cables, but you can check for current drivers if you are using a cable that uses their chipset. The other major chipset used in USB-to-Serial adapters is made by FTDI. If you purchased a 3rd-party USB-to-Serial adapter cable, then you must use the drivers appropriate to that cable. Drivers for other operating systems might be available in the support section at: IMPORTANT: The drivers linked above will only work with cables that use the Prolific PL2303 chipset, like the USB-1 cable. The USB-1 cable uses the Prolific PL2303 chipset.
BC95XLT Before using the cable, or if you have problems connecting to the scanner, you should check to be sure you have installed the latest drivers for the cable. USB-1 Drivers The USB-1 cable is used to connect the following Uniden scanners to a PC using the PC's USB port.
0 kommentar(er)
